PS AUDIO DIRECTSTREAM POWER PLANT P15
Assistenza italiana
Spedizione monitorata
Consulenza e preventivi
Purify, protect, regulate, and rebuild unrestricted new power from old with the P15, our second most powerful AC regenerator.
The DirectStream P15 Power Plant is the gold standard for safety, reliability, and high-performance AC power regeneration. The P15 improves micro and macro dynamics, audio purity, instrumental separation, soundstage width and depth, and lowers background noise for any connected equipment. From medium to large power amplifiers to the smallest pieces of source equipment, the P15 will work magic on your system’s performance. Don’t starve your music or risk damaging your equipment. A P15 gives you greatly improved performance and safety from just plugging into the wall socket and far better dynamics, bass and a much bigger, open soundstage than any power conditioner on the market.
Inizio modulo
DESIGN
The P15 features an ultra-low impedance analog power amplifier, FPGA based sine wave generator based on pure, clean, analog DSD (PCM), 10 outlets (US version) across 5 separate regenerated zones, and 1/4" thick copper busbars that deliver regenerated power to each receptacle. Through regeneration, the P15 creates a completely new AC waveform that adds missing energy back onto the power line to correct for serious issues, such as distortion and voltage fluctuations.
APPLICATION
With a maximum output of 1500 watts, the P15 regenerates steady, regulated, pure AC that is unaffected by your equipment's demands for power. Powering your system from the outlets of the P15 will reveal new voices, new harmonics, and a renewed sense of musicality. As the gold standard for safety, reliability, and high-performace AC power regeneration, the P15 will ensure you receive the same great performance every time you listen and provide a firm foundation for your system.
The DirectStream Power Plant 15 is the next generation of AC power regeneration. It has 5 separate regenerated zones, buss bar delivery system, and 1500 watts of pure regenerated power. From medium to large power amplifiers to the smallest pieces of source equipment, the P15 will work magic on your system’s performance. Expect far better micro and macro dynamics as well as a cleaner, lower noise background. Power regeneration uses active components, like those found in large, powerful audio amplifiers, to rebuild the AC power and produce clean, clear, distortion-free, regulated AC to the equipment. The results are dramatic: unrestrained dynamics even under the loudest passages, an open, wide soundstage that does not collapse with volume and a naturalness to the music that is remarkable. The 7-inch, full color display on the front panel of the P15 allows you to measure distortion, both incoming and outgoing, improvement levels, and power consumption. You can also adjust your settings, such as the turn on/off sequence and the output voltage, as well as turn individual zones on or off, and measure the power quality with either the built-in oscilloscope or the THD analyzer.
Features
- BUILT IN BOULDER
- 1500 VA OUTPUT
- 3x LOWER IMPEDENCE THAN P10 POWER PLANT
- 10x OUTLETS US
- 15AMP AC INPUT US
- 120 VOLT REGULATED US
- RANGE 95 – 145 VAC US
- 9x EU/AU/GR/UK OUTLETS
- 10AMP AC INPUT EU/AU/GR/UK
- 230 VOLT REGULATED EU/AU/GR/UK
- RANGE 200 –285VAC EU/AU/GR/UK
- 100% REGENERATED AC
- PASSIVELY COOLED
- PURE SINE WAVE
- MULTIWAVE
- INTEGRATED OSCILLOSCOPE
- THD METER
- IMPROVEMENT METER
- POWER METER
- CONTROL OVER THE LAN
- ADJUTABLE OUTPUT VOLTAGE
- COLOR TOUCHSCREEN
- FIELD UPGRADEABLE
- 82 LBS.
- 17W x 8.5H x 14D
Specifications
Environment Specification |
US/JP |
Europe/Asia |
Location |
Indoor use only |
Indoor use only |
Duty Cycle |
Suitable for continuous operation |
Suitable for continuous operation |
Moisture Sensitivity |
Not sealed against moisture |
Not sealed against moisture |
Operating Humidity |
<80%rh |
<80%rh |
Storage Temperature |
-40C to +40C |
-40C to +40C |
Operating Temperature |
0C to 40C |
0C to 40C |
Max Operating Altitude |
12,000’ (3500m) |
12,000’ (3500m) |
Electrical Supply Nominal Rating |
120V 15A 60Hz US |
230V 10A 50/60Hz |
Instrument Specification |
||
Unit Dimensions |
17” W x 14” D x 8.5” H (43cm W x 36cm D x 21.5 cm H) |
17” W x 14” D x 8.5” H (43cm W x 36cm D x 21.5 cm H) |
Unit Weight |
73 lbs ( 33kg) |
73 lbs ( 33kg) |
Shipping Dimensions |
23” x 20.5” x 13.5” ( 58cm x 52cm x 34cm) |
23” x 20.5” x 13.5” ( 58cm x 52cm x 34cm) |
Shipping Weight |
82 lbs (38kg) |
82 lbs (38kg) |
Nominal Input Voltage |
95 – 145 VAC |
200 –285VAC |
Maximum Continuous Load |
1200VA |
1500VA |
Maximum Peak Load |
3600VA |
3600VA |
Voltage Regulation |
1V |
1V |
Output Distortion (Resistive Load) |
<0.5% |
<0.9% |
Output Distortion (Reactive Load) |
<0.5% |
<0.9% |
Output Impedance |
<0.008 ohm |
<0.008 ohm |
Noise Reduction |
100kHz – 2MHz >80dB |
100kHz – 2MHz >80dB |
Efficiency @1200 VA |
>85% |
>85% |
Standby Power Consumption |
||
Input Frequency |
45 – 65 Hz |
45 – 65 Hz |
Under Voltage Limit |
Continuous -10% of setting 15 sec duration -15% of setting |
Continuous -10% of setting 15 sec duration -15% of setting |
Over Voltage Limit |
Continuous 5% of setting 15 sec duration 10% of setting |
Continuous 5% of setting 15 sec duration 10% of setting |
Energy Dissipation |
2440J |
3670J |
Peak Current Surge |
144,000A |
84,000A |
Max Surge Voltage |
6,000V |
6,000V |
Clamp Level |
330V |
800V |
DC Trigger Configuration |
Tip Positive |
Tip Positive |
DC Trigger Voltage |
5 – 15Vdc |
5 – 15Vdc |