- New
Stereo / Mono Power Amplifier
Assistenza italiana
Consulenza e preventivi
Spedizione monitorata
The Gold Note PA-10 EVO is a compact and versatile power amplifier designed to deliver High-End performance in modern Hi-Fi systems. Built using carefully selected components and individually assembled and tested in Italy, it combines refined construction, substantial driving capability and elegant design, featuring the solid aluminium chassis of the Gold Note Series 10.
Despite its remarkably compact dimensions, the PA-10 EVO delivers 140 watts per channel in stereo configuration and up to 280 watts in mono configuration. This flexibility allows it to operate as a stereo power amplifier or to be used in pairs as monoblock amplifiers, with one dedicated unit for each channel in a high-performance audio system.
The Gold Note PA-10 EVO is designed to adapt to different listening requirements and system configurations. In stereo mode, it delivers 2 x 140 watts into 8 and 4 Ohm loads, providing the power and control required to drive a wide range of loudspeakers.
In mono configuration, the amplifier can deliver 280 watts into 8 and 4 Ohms. Using two PA-10 EVO units, one for each channel, makes it possible to build a dual-mono system, offering greater flexibility when designing a High-End audio setup.
One of the most interesting features of the PA-10 EVO is its selectable damping factor, with two settings: High at 250 and Low at 25. This allows the amplifier's behaviour to be tailored to the characteristics of the connected loudspeakers and individual listening preferences.
The High setting is intended to provide particularly effective woofer control, while the Low setting offers a lower damping factor and an additional matching option for different loudspeaker designs. This feature makes the PA-10 EVO highly versatile, even in sophisticated audio systems.
Connectivity includes one stereo unbalanced RCA input and one stereo balanced XLR input, allowing connection to a wide range of preamplifiers and audio sources. The balanced XLR input is particularly useful in high-quality systems and configurations featuring compatible electronics.
The GN Link system also allows the amplifier to be switched on and off through a connection with other compatible Gold Note components. Master/Slave operation makes it possible to coordinate multiple units, simplifying the operation of systems featuring several components.
The solid aluminium chassis follows the distinctive design language of the Gold Note Series 10, combining compact dimensions, clean lines and carefully engineered construction. Its structure is designed to provide strength and help protect the internal circuitry.
Measuring just 200 x 80 x 260 mm, the PA-10 EVO can easily be integrated into Hi-Fi systems where space is limited, while maintaining a consistent appearance with other compact Gold Note electronics.
The Gold Note PA-10 EVO is particularly well suited to pairing with the DS-10 EVO streamer and preamplifier, as well as other components in the Gold Note range. Stereo or mono operation, adjustable damping factor and balanced connectivity make it an excellent choice for high-performance audio systems and customised configurations.
Available in elegant Black, Silver and Gold finishes, the Gold Note PA-10 EVO is an ideal solution for anyone looking for a compact, powerful and versatile power amplifier, offering high-quality performance and considerable freedom when designing an audio system.
| Type | Stereo / Mono power amplifier |
| Stereo output power | 2 x 140 W into 8 Ohms / 4 Ohms |
| Mono output power | 1 x 280 W into 8 Ohms / 4 Ohms |
| Frequency response | 5 Hz – 50 kHz (-3 dB) |
| Total harmonic distortion THD+N | 0.01% (1 kHz at 1 W) |
| Damping factor | High: 250 / Low: 25 |
| Audio inputs | 1 x stereo unbalanced RCA; 1 x stereo balanced XLR |
| Input sensitivity | 2.5 Vrms RCA / XLR |
| Input impedance | RCA: 3.6 kOhms; XLR: 7.2 kOhms |
| Audio outputs | Loudspeaker terminals |
| Remote control | GN Link with Master/Slave function |
| Standby power consumption | <1 W |
| Power consumption without signal | <6 W |
| Power supply | 100–240 V, 50/60 Hz |
| Fuse | 5 A slow-blow (T) |
| Dimensions (W x H x D) | 200 x 80 x 260 mm |
| Available finishes | Black, Silver, Gold – brushed anodised aluminium |
| Operating temperature | 0 °C to 35 °C |
| Operating humidity | 90% non-condensing |
| Warranty | 2 years |