ISOACOUSTICS GAIA TITAN THEIS

Gaia Titan are the best acoustic decouplers for ultra high end speakers

The IsoAcoustics Gaia family consists of two lines, Gaia and Gaia Titan, tuned and optimized for different speaker weight ranges. The Gaia range is designed for speakers weighing up to 100 kg while the Titan line was created to increase the performance of High End speakers above this weight threshold. Precisely for those who are not satisfied and own high-level speakers, IsoAcoustics has created the Gaia Titan series which bring High End speakers to the performance for which they were designed. IsoAcoustics Gaia Titan is available in three models, for speakers weighing up to 100, 190 or 280 kg for each speaker.

Remember that the larger the speaker, the greater the difference the Gaia can make. The results are nothing short of astonishing on every high-end and very high-end speaker. Let's think about Kef Reference or Blade, Confidence by Dynaudio, Utopia by Focal, Seri 800 by B&W etc, or even Wilson, Rockport etc. All speakers which, as many enthusiasts tell us, are transformed by the addition of IsoAcoustics.

IsoAcoustics Gaia Titan – High End speaker isolators

Modern high-end esoteric speakers are capable of great precision and know how to combine power and detail. Similar to performance tires on a race car, Gaia Titan decoupling stands allow high-end speakers to reach their full potential, delivering stunning, natural openness and clarity to music. The Gaia Titan Series features the same patented isolation technology as the award-winning Gaia Series, and takes the loadable weight limit much higher to nearly 300kg. Gaia Titan Isolators are stainless steel units that incorporate patented IsoAcoustics to provide a high degree of speaker isolation. Able to resist lateral movements and oscillations, Gaia Titan precisely maintains alignment with the listening position.

Theis, Rhea, Cronos for very large speakers

The Gaia Titan models, as in the case of the Gaia family, must be chosen exclusively based on the weight of the speaker owned. Each model supports a very specific weight range, outside of which it does not insulate but just supports. It is essential that the speaker fully falls within the recommended parameters, otherwise the insulation capacity of Gaia will be impaired. It is interesting to note that the larger the size and weight of the speaker, the greater the real difference that the Gaia decouplers produce, to the point of real dismay for the listener. High End speakers of 150 or 200kg each are literally transformed and come to sound as they were designed. Alternative screw sizes and thread pitches other than those already in the package are available upon request, to fit almost all current and past speakers.

IsoAcoustics Gaia Titan Theis

Gaia Titan Theis is able to perfectly isolate speakers with a single weight of up to 145 kg. The weight supported is intended to be divided between the four supports contained in a package, and not per single "foot". So a pack of 4 Titan Theis feet supports a speaker weighing up to 145kg. Three different threaded screws are supplied in the pack which will fit most speakers of this size. With Gaia Titan Theis ½”-13, M8-1.25 and M14-2.0 are included while other threads can be supplied upon request. The dimensions of Gaia Theis are 2.75” / 70mm (base) x 2” / 50mm (height).

IsoAcoustics Gaia Titan Rhea

Gaia Titan Rhea is capable of carrying loads of up to 190 kg. The weight supported is intended to be divided equally between the four supports contained in a set, and not per single "foot". Therefore 190 kg is the maximum total weight that a pack of 4 feet can bear, i.e. the maximum weight of a single floorstanding speaker that we want to isolate. Three different threaded screws are provided in the package and will fit most speakers of this size. Included with Gaia Titan Rhea are ½”-13, M8-1.25, and M14-2.0. Titan Rhea measures 3.15″ / 80mm (base) x 2.3″ / 58mm (height).

IsoAcoustics Gaia Titan Cronos

Gaia Titan Cronos, the alpha male of IsoAcoustics! This set of 4 decoupling feet is capable of carrying loads of up to 280 kg. The weight supported is per speaker, and therefore divided between the four supports contained in a package, and not per single "foot". Three different threaded screws are provided in the package and will fit most speakers of this size. Three sets of screws ½”-13, M10-1.5 and M14-2.0 are included with the Gaia Titan Cronos. The dimensions of Gaia Titan Cronos are 3.94″ / 100mm (base) x 2.3″ / 58mm (height.)