Integrated 50+50W RMS amplifier into 8 ohm, high current final stage, power section with toroidal transformer, electronic speaker protection, bass/treble tone and balance control. 3 line inputs, 1 MM phono input.

Headphone output with dedicated amplifier. Dual 12V trigger command. Remote control supplied.

Other features

Rotel A10MKII Integrated Amplifier The A10MKII integrated amplifier offers the perfect combination of power and style for music lovers looking to enhance their listening experience.

Built around a linear power stage equipped with a massive toroidal power transformer produced by Rotel, the A10MKII delivers a power of 50 watts per channel in class A/B into 8 ohms, which increases if the speakers to be driven have a even more demanding impedance module.

The power supply stage and the careful arrangement of the most critical electronic circuits offer a clear physical and electrical separation, to the advantage of reducing background noise and increasing dynamics.

The multi-winding transformer provides isolated power to all sensitive low-voltage circuitry, and the high-current output transistors further isolate the signal paths, reducing unwanted distortion.

This design supports fast transients and offers an expressive and realistic musical performance.

All analogue sources are supported, with three line-level RCA inputs and a MM Phono stage compatible with moving magnet cartridges for vinyl lovers.

The equipment also includes a headphone output with dedicated amplifier on the front panel. On the same there are tone controls for bass and treble and channel balance.

Included, we finally have the remote control that controls the volume in an analogue way, via a motorized potentiometer.

Highlights compared to the previous version Rotel A10:

- 65 new improved components

- The power increases by 10 Watts (from 40 to 50)

- Remote control supplied

Technical features:

Continuous output power: 50W/Ch (8ohm)

Total harmonic distortion: <0.03%

Frequency Response: Line Inputs: 10 Hz - 100k Hz, -0.5 dB, +0.05 dB;

Phon input: 20 Hz - 20k Hz, -0.5 dB, +0.3 dB

Signal to Noise Ratio (IHF "A" weighted): Line Inputs: 90dB;

Phon input: 85dB BTU (4ohm, 1/8 of Rated power): 450 BTU/h

Intermodulation distortion (60HZ:7KHZ, 4:1): <0.03%

Damping factor: 120

Input sensitivity: Line Inputs: 120MV, Phono Input (MM): 1.5MV

Input impedance: Line Inputs: 45K OHM,

Phono input (MM): 43K OHM

Input overload level: Line inputs: 4V,

Phono input: 50MV

Tone Controls: ±6DB AT 100HZ / 10KHZ

Dimensions (W×H×D): 430x73x347 mm Front panel height: 60 mm

Power supply: 230V, 50Hz

Consumption: 150W

Stand-By consumption: <0.5W

Net weight: 6.6kg

WIIM MINI

Streame network DAC. Music transmission via DLNA, WiFi, AirPlay 2 or Bluetooth 5.0 both in transmission and reception. Compatible with Alexa and Siri. Internal microphone. Integrated popular streamer services, such as Spotify, Tidal, Qobuz, Amazon Music, etc. WiiM Home App for both iOS and Android. Integrated TI PCM5151 DAC (24/192). Dualcore A7 CPU. Multiroom. 3.5mm analog audio input and output. Optical digital output. Gapless playback. Touch buttons on the top. Dimensions (WxHxD): 69x24x69mm. Weight: 40g.

The WiiM Mini is a small and extremely versatile network player, ideal for converting a conventional audio system into a connected system. Wiim Mini allows you to stream music remotely via WiFi, AirPlay 2 or Bluetooth 5.0. Compatible with Amazon Alexa and Apple Siri voice assistants. Compatible with many streaming and web radio services, such as Spotify, Tidal, Qobuz, Deezer, Amazon Music or TuneIn. Free WiiM Home mobile app for iOS and Android to easily control all WiiM devices connected to your network. WiiM Mini's built-in multiroom feature lets you stream your music throughout your home.

Characteristics

Apple AirPlay 2

AVS without microphone and MRM (Multi-Room)

LinkPlay streaming services, including all major music services

Spotify Connect/TIDAL Connect/Amazon Music Casting

DLNA

High resolution 24-bit/192 kHz optical output

Bit perfect output

Gapless seamless playback

Bluetooth receiver and transmitter

Texas Instruments PCM 5151 DAC