High-End Portable DAC and Headphone Amplifier
Assistenza italiana
Consulenza e preventivi
Spedizione monitorata
The iFi iDSD Valkyrie is a high-end portable DAC and headphone amplifier designed to deliver desktop-class performance in a battery-powered format. With an exceptionally powerful amplification stage, sophisticated Quad-DAC architecture, advanced digital processing and extensive connectivity, Valkyrie is designed for demanding headphone enthusiasts who want maximum flexibility without compromising sound quality.
At the heart of the Valkyrie is a Quad-DAC Burr-Brown architecture, combined with iFi's proprietary FPGA processing and DSD remastering technology capable of reaching DSD1024. Native PCM playback is supported up to 768 kHz, while native DSD playback reaches DSD512.
The amplification section is equally impressive, delivering up to 5,700 mW through the balanced 4.4 mm headphone output. This makes Valkyrie suitable for a huge variety of headphones, including highly sensitive IEMs, demanding planar magnetic headphones and high-impedance dynamic models.
The iDSD Valkyrie employs a sophisticated Quad-DAC configuration based on four Burr-Brown DSD1793 converters.
This architecture allows the DAC section to achieve excellent linearity, extremely high resolution and precise reproduction of low-level musical information. The carefully designed analogue circuitry complements the digital conversion stage, helping to maintain signal integrity and reduce interference.
The result is a highly resolving yet musical presentation, capable of revealing subtle details while maintaining a natural and engaging sound.
One of the most distinctive features of the Valkyrie is its DSD Remastering engine, managed by a dedicated FPGA platform.
The system can internally process compatible digital signals and remaster them to resolutions of up to DSD1024. This provides an alternative processing path to conventional PCM conversion and allows the listener to experiment with different approaches to digital playback.
Native DSD files are supported up to DSD512, while the internal processing architecture allows the Valkyrie to perform its proprietary high-resolution remastering.
The amplification stage is one of the defining features of the iDSD Valkyrie.
The balanced 4.4 mm output can deliver up to 5,700 mW into 32 Ohms, with a maximum voltage output of 13.5 V.
This enormous power reserve provides excellent control and dynamic headroom, even with demanding headphones.
The 4.4 mm balanced output can deliver:
The S-Balanced 3.5 mm output also offers impressive performance, reaching up to 2,475 mW at 32 Ohms.
Thanks to its combination of high current delivery and substantial voltage swing, the Valkyrie can comfortably drive a wide variety of headphones.
It is suitable for sensitive in-ear monitors as well as demanding full-size headphones and planar magnetic designs.
The balanced output can reach 19.6 V and 640 mW at 600 Ohms, making Valkyrie particularly suitable for high-impedance headphones that require substantial voltage swing.
The wireless section uses the Qualcomm QCC518x platform and supports Bluetooth 5.4.
Compatible codecs include aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC and SBC.
With aptX Lossless, compatible smartphones and transmitters can send CD-quality audio wirelessly without conventional lossy compression, making Bluetooth a serious high-quality source option for the Valkyrie.
The digital section supports PCM up to 32-bit/768 kHz and Native DSD512.
This makes the Valkyrie compatible with virtually all major high-resolution digital audio formats, whether the source is a computer, smartphone, digital transport, streamer or other Hi-Fi component.
Valkyrie provides a wide selection of digital processing options, allowing the listener to fine-tune the character of the DAC according to the recording, headphones and personal preferences.
Available digital filters include:
The unit also incorporates K2 and K2HD processing modes for additional control over the digital signal.
The K2HD technology developed by JVCKENWOOD is designed to reconstruct harmonic information that may be lost during recording and digital processing.
The objective is to achieve a more natural and emotionally engaging presentation, with greater harmonic richness and a more realistic musical character.
Valkyrie includes three analogue processing technologies that allow the sound to be tailored to different headphones and listening preferences.
XBass II enhances low-frequency extension and presence while maintaining a natural balance.
XPresence focuses on the midrange, providing additional presence and body to vocals and instruments when required.
XSpace expands the perceived soundstage, creating a more spacious presentation with headphones that can otherwise sound overly intimate.
To support its powerful amplification and sophisticated electronics, the iDSD Valkyrie incorporates a massive 20,000 mAh Lithium-Polymer battery.
The battery is constructed from four 5,000 mAh cells and provides up to approximately 18 hours of operation, depending on the selected operating mode and listening conditions.
This allows Valkyrie to operate independently from the mains for extended listening sessions while also helping to provide an exceptionally clean power environment for the audio circuitry.
For desktop operation, the Valkyrie is supplied with a SilentPower iPower X power supply.
The low-noise power supply is designed to minimise unwanted electrical interference and provide a clean power source for the unit when used as part of a stationary Hi-Fi system.
The iDSD Valkyrie offers a comprehensive selection of digital inputs.
Connections include USB-C, S/PDIF optical/coaxial and Bluetooth 5.4.
This allows the unit to be used with computers, smartphones, tablets, digital transports, streamers and conventional Hi-Fi sources.
Valkyrie is also designed to operate as a versatile analogue component.
Analogue inputs include 4.4 mm balanced and 3.5 mm single-ended connections.
Analogue outputs include a 4.4 mm balanced output, two 3.5 mm single-ended outputs and RCA, allowing the Valkyrie to operate as a DAC and preamplifier within a larger Hi-Fi system.
Although the iDSD Valkyrie is technically a portable product, its performance and physical design place it much closer to a compact desktop component than to a conventional pocket-sized DAC.
Its dimensions are 172 x 160 x 30 mm and its net weight is 882 g. The substantial battery and powerful electronics make it considerably larger than typical portable DACs, but still compact enough to be transported when required.
This makes Valkyrie particularly attractive to listeners who want the performance of a high-end desktop headphone system without being permanently tied to a mains-powered setup.
The iFi iDSD Valkyrie is aimed at listeners who want uncompromising headphone performance without giving up the flexibility of battery operation.
The combination of Quad-DAC Burr-Brown conversion, DSD1024 Remastering, up to 5,700 mW of output power, Bluetooth 5.4 with aptX Lossless and a 20,000 mAh battery places the Valkyrie among the most sophisticated portable DAC/headphone amplifiers available.
Its extensive connectivity also allows it to function as much more than a headphone amplifier. With balanced and single-ended analogue inputs and outputs, as well as RCA connectivity, it can become the central digital source and preamplifier of a personal Hi-Fi system.
The combination of digital filters, K2HD, XBass II, XPresence and XSpace provides extensive possibilities for tailoring the listening experience to different headphones, recordings and personal preferences.
For demanding headphone enthusiasts looking for a powerful, versatile and genuinely high-end portable DAC and amplifier, the iFi iDSD Valkyrie is a particularly complete solution.
| Specification | Value |
|---|---|
| Type | High-End Portable DAC / Headphone Amplifier |
| DAC Architecture | Quad-DAC Burr-Brown |
| DAC Chips | 4 x Burr-Brown DSD1793 |
| PCM | Up to 32-bit / 768 kHz |
| Native DSD | Up to DSD512 |
| DSD Remastering | Up to DSD1024 |
| Digital Filters | Bit Perfect, Standard, Minimum Phase, GTO, Apodising, Transient Aligned |
| Additional Processing | K2 and K2HD |
| Analogue Processing | XBass II, XPresence, XSpace |
| Bluetooth | 5.4 |
| Bluetooth Chipset | Qualcomm QCC518x |
| Bluetooth Codecs | aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC, SBC |
| Digital Inputs | USB-C; S/PDIF optical/coaxial; Bluetooth |
| Analogue Inputs | 4.4 mm balanced; 3.5 mm single-ended |
| Analogue Outputs | 4.4 mm balanced; 2 x 3.5 mm single-ended; RCA |
| Balanced Headphone Output | 13.5 V / 5,700 mW @ 32 Ohms; 19.6 V / 640 mW @ 600 Ohms |
| 3.5 mm S-Balanced Output | 8.9 V / 2,475 mW @ 32 Ohms; 9.8 V / 160 mW @ 600 Ohms |
| Balanced Output @ 64 Ohms | 12.0 V / 2,250 mW |
| Headphone Output Impedance - 4.4 mm | ≤ 0.3 Ohms |
| Headphone Output Impedance - 3.5 mm | ≤ 0.2 Ohms |
| Line Output Impedance - 4.4 mm | 205 Ohms |
| Line Output Impedance - 3.5 mm | 105 Ohms |
| Line Output SNR | 116 dBA |
| Line Output DNR | 116 dBA |
| Line Output THD+N | 0.002% (20 Hz - 20 kHz) |
| Battery | 20,000 mAh Lithium-Polymer |
| Battery Life | Up to approximately 18 hours |
| Charging | PD/QC3.0 @ 20 V; QC2.0 @ 5-12 V |
| Power Supply | SilentPower iPower X included |
| Dimensions | 172 x 160 x 30 mm |
| Net Weight | 882 g |
| Shipping Weight | Not specified by the manufacturer |