- New
Hi-Fi Integrated Stereo Amplifier with DAC and MM Phono Input
Assistenza italiana
Consulenza e preventivi
Spedizione monitorata
The Rega Brio MK7 is an integrated stereo amplifier designed to deliver high-quality musical performance in a compact and elegant format. The latest evolution of one of Rega's most popular amplifiers features completely redesigned circuitry, an integrated digital-to-analogue converter and improved isolation between amplification stages, while retaining the straightforward engineering philosophy that defines the British brand.
Delivering 50 watts per channel into 8 Ohms and 72 watts into 4 Ohms, the Brio MK7 can drive a wide range of bookshelf and floorstanding loudspeakers, providing dynamic, precise and engaging sound reproduction. Its Class AB circuit has been optimised to reduce distortion and improve overall signal quality, resulting in a balanced presentation with excellent detail.
The Brio MK7 has been extensively redesigned to improve the performance of every section. Its new circuit board uses carefully selected components and high-quality MUSES operational amplifiers in the phono, DAC and line stages.
The power supply has also been optimised through the introduction of a second dedicated supply, improving isolation between the output stage and the preamplifier sections. This design helps reduce interference between circuits, preserving signal clarity and playback precision.
The Class AB output stage delivers 50 W per channel into 8 Ohms and 72 W per channel into 4 Ohms, providing ample power for a wide range of stereo configurations. Rega's design philosophy prioritises controlled power delivery and dynamic musical reproduction, with particular attention to tonal coherence and natural vocals.
Integrated short-circuit and thermal protection systems help safeguard the electronics and connected loudspeakers during operation. The thermal protection system automatically intervenes if the internal temperature reaches potentially damaging levels.
One of the main additions to the Brio MK7 is its integrated Rega digital-to-analogue converter, allowing digital sources such as CD players, music streamers, televisions and other devices with digital outputs to be connected directly.
One coaxial S/PDIF input and one optical Toslink input are available, supporting PCM signals up to 24-bit/192 kHz. This allows the Brio MK7 to act as the central component of a modern stereo system without necessarily requiring an external DAC.
The Rega Brio MK7 incorporates a dedicated phono stage for Moving Magnet (MM) cartridges, designed to provide accurate RIAA equalisation and high-quality analogue playback. The circuit benefits from improved isolation from the other amplifier stages and carefully selected components that help preserve the detail and natural character of vinyl recordings.
The integrated phono input allows a turntable fitted with an MM cartridge to be connected directly, without the need for an external phono preamplifier. Three additional RCA line-level inputs are also provided for other audio sources.
The Brio MK7 features a front-panel headphone output with a dedicated circuit designed to drive standard Hi-Fi headphones without compromising the quality of the main audio signal path. When headphones are connected, the loudspeaker output is automatically muted.
The Standby function reduces power consumption when the amplifier is not in use. Auto Standby is also available and activates after approximately one hour without a signal on the selected input; this function can be disabled if required. The supplied mini-system remote control allows standby operation.
The custom half-width aluminium chassis provides solid construction and effective heat dissipation. Its compact dimensions make the Brio MK7 easy to integrate into home stereo systems, even where available space is limited.
| Type | Integrated stereo amplifier |
| Amplifier architecture | Transistor, Class AB |
| Output power | 50 W per channel into 8 Ohms |
| Output power into 4 Ohms | 72 W per channel |
| Output power into 6 Ohms | 73 W per channel, according to the manual |
| Analogue inputs | 1 MM phono and 3 RCA line inputs |
| Digital inputs | 1 coaxial S/PDIF and 1 optical Toslink |
| DAC | Integrated Rega DAC |
| Supported digital resolution | 16–24 bit |
| Supported sampling rates | 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz |
| Phono input | Moving Magnet (MM) |
| Phono input sensitivity | 2.1 mV |
| Phono input impedance | 47 kOhms in parallel with 220 pF |
| Line input sensitivity | 210 mV |
| Line input impedance | 47 kOhms |
| Phono frequency response | 15 Hz (-3 dB) – 40 kHz (-3 dB) |
| Line frequency response | 12 Hz (-1 dB) – 43 kHz (-3 dB) |
| RIAA equalisation accuracy | Better than ±0.5 dB from 100 Hz to 20 kHz |
| Line input THD+N | Typically 0.005% at 1 kHz, A-weighted |
| Headphone output | Yes, front-panel jack |
| Headphone output voltage, no load | 8 V |
| Headphone output voltage into 300 Ohms | 5.9 V |
| Headphone output voltage into 54 Ohms | 2.6 V |
| Headphone output voltage into 32 Ohms | 1.8 V |
| Headphone output source impedance | 109 Ohms |
| Power consumption | 200 W |
| Standby power consumption | 0.4 W |
| Power supply | 230 V / 220 V / 120 V / 100 V AC, ±10% |
| Dimensions (W x H x D) | 216 x 79 x 365 mm |
| Net weight | 4.9 kg |
| Included accessories | Mini-system remote control and power cable |
| Warranty | 2 years |
The Rega Brio MK7 is an ideal integrated amplifier for anyone looking for a compact, musical and versatile stereo system. Its combination of Class AB amplification, integrated DAC, MM phono stage and headphone output makes it easy to connect turntables, digital players, streamers and other sources, delivering high-quality Hi-Fi performance from a single component.