MM/MC Phono Preamplifier
Assistenza italiana
Consulenza e preventivi
Spedizione monitorata
iFi Audio ZEN Air Phono 2 is a dedicated phono preamplifier designed to get the most from vinyl playback, providing a compact, quiet and highly accurate solution for turntables equipped with MM (Moving Magnet) or MC (Moving Coil) cartridges.
Designed to overcome the limitations of the phono stages integrated into many amplifiers and turntables, the ZEN Air Phono 2 combines highly accurate RIAA equalisation, a symmetrical channel layout, extremely low noise and an innovative Intelligent Subsonic Filter in a compact and affordable format.
The signal generated by a turntable cartridge is extremely delicate and requires dedicated amplification before it can be sent to an integrated amplifier or line preamplifier.
The ZEN Air Phono 2 has been designed specifically for this task, providing precise signal amplification and RIAA equalisation.
Its architecture delivers a cleaner, more detailed and dynamic sound than many entry-level integrated phono stages, making it an excellent solution for entry-level and mid-level analogue systems.
One of the main strengths of the ZEN Air Phono 2 is its ability to work with both Moving Magnet (MM) and Moving Coil (MC) cartridges.
Since the two technologies require different levels of amplification, iFi has included a dedicated gain selector.
MM mode provides 40 dB of gain, while MC mode reaches 64 dB, allowing the phono stage to be correctly matched to the cartridge being used.
Vinyl playback requires the inverse RIAA equalisation used during record cutting. Accuracy at this stage is therefore essential to preserve the original tonal balance of the recording.
The ZEN Air Phono 2 provides RIAA accuracy of just ±0.15 dB from 20 Hz to 20 kHz.
This high level of accuracy contributes to a particularly neutral reproduction, avoiding unwanted alterations to the balance between low, mid and high frequencies.
One of the most distinctive features of the design is iFi's Intelligent Subsonic Filter.
Slightly warped records can cause very low-frequency movement of the cartridge and tonearm assembly, producing unwanted rumble. A conventional subsonic filter can also affect musically important low frequencies, reducing bass depth and impact.
iFi's system is designed to distinguish subsonic movement caused by record warping from musical information, removing unwanted rumble without compromising the low-frequency response.
The result is cleaner and more stable reproduction while retaining the depth and extension of the original bass information.
The ZEN Air Phono 2 uses a Symmetrical Channel Layout, an architecture designed to provide some of the advantages normally associated with balanced circuit configurations.
This approach contributes to reduced noise, improved channel separation and higher output capability.
It is an especially interesting design solution considering the product's price category.
When dealing with the analogue signal generated by a turntable, background noise can easily mask the micro-information contained in a recording.
The ZEN Air Phono 2 has been engineered with particular attention to this aspect, achieving EIN values as low as -146 dBV in MC mode and -126 dBV in MM mode, A-weighted.
This allows for an exceptionally quiet listening background, improving the system's ability to reveal details, textures and subtle nuances in analogue recordings.
Total harmonic distortion is also kept to very low levels.
In MM mode, THD+N is below 0.005%, while in MC mode it is below 0.036%, measured at 1 V.
These figures contribute to transparent and faithful signal reproduction.
The preamplifier can deliver a maximum output voltage of 6.5 V RMS, providing ample level reserve when connected to an integrated amplifier, preamplifier or another component in the Hi-Fi chain.
The 100 Ohm output impedance also facilitates integration with a wide range of audio equipment.
The ZEN Air Phono 2 uses the characteristic compact form factor of the iFi ZEN Air family, allowing it to be easily incorporated into virtually any Hi-Fi system.
Measuring just 158 x 117 x 35 mm, it can be positioned next to a turntable, on a Hi-Fi rack or close to an amplifier without taking up significant space.
Its weight of just 323 grams further enhances its practicality.
The ZEN Air Phono 2 is also designed for highly efficient operation, with power consumption below 1.8 W.
This makes the unit energy efficient and well suited to permanent integration into an analogue system.
The ZEN Air Phono 2 is designed for straightforward integration.
Simply connect the turntable to the phono input, select MM or MC according to the installed cartridge and connect the preamplifier output to a line input on the amplifier.
Selecting the appropriate gain ensures a suitable signal level while avoiding under-driving or overloading the input of the downstream component.
The unit is powered via the included USB-to-DC cable, providing a practical 5 V power solution compatible with the design.
The low power requirement also helps keep the power supply compact and energy efficient.
iFi Audio ZEN Air Phono 2 is an especially attractive choice for anyone looking to significantly improve the phono section of their system without the cost and size associated with a higher-end phono stage.
Its compatibility with MM and MC cartridges, highly accurate RIAA equalisation, symmetrical channel layout and extremely low noise allow vinyl playback to sound cleaner, more dynamic and more detailed.
The Intelligent Subsonic Filter is another significant advantage when playing records that are not perfectly flat, as it removes unwanted rumble without sacrificing the depth of musically important low frequencies.
The result is a compact, efficient and versatile phono stage capable of fitting easily into both an entry-level Hi-Fi system and a more advanced analogue chain.
| Specification | Value |
|---|---|
| Type | MM/MC phono preamplifier |
| Supported Cartridges | Moving Magnet (MM) and Moving Coil (MC) |
| MM Gain | 40 dB ±1 dB |
| MC Gain | 64 dB ±1 dB |
| MM Input Impedance | 47 kOhm |
| MC Input Impedance | 1 kOhm |
| Output Impedance | 100 Ohm |
| RIAA Equalisation | 20 Hz - 20 kHz, ±0.15 dB |
| Subsonic Filter | Intelligent Subsonic Filter |
| Maximum Output Voltage | 6.5 V RMS |
| SNR MM | 86 dB A-weighted, referenced to 1 V |
| SNR MC | 40 dB A-weighted, referenced to 1 V |
| EIN MM | 6.5 nV/√Hz unweighted; -126 dBV A-weighted |
| EIN MC | 0.6 nV/√Hz unweighted; -146 dBV A-weighted |
| THD+N MM | < -90 dB / 0.005% at 1 V |
| THD+N MC | < -80 dB / 0.036% at 1 V |
| Circuit Layout | Symmetrical Channel Layout |
| Power Supply | DC 5 V / ≥1 A, centre positive |
| Power Consumption | < 1.8 W |
| Dimensions | 158 x 117 x 35 mm |
| Net Weight | 323 g |
| Box Contents | ZEN Air Phono 2, USB-to-DC cable, quick-start guide, warranty card |
| Warranty | 24 months in the EU |