12" Ported Active Subwoofer
Assistenza italiana
Consulenza e preventivi
Spedizione monitorata
The SVS PB-1000 Pro is a high-performance active subwoofer designed for listeners who want deep, powerful and precisely controlled low frequencies. Its combination of a new 12-inch high-excursion driver, the Sledge STA-325D amplifier and a dual-port bass-reflex cabinet delivers exceptional low-frequency extension, high output and an immersive physical impact.
Designed for both Hi-Fi stereo and Home Cinema systems, the PB-1000 Pro reaches down to 17 Hz with a frequency response of 17-260 Hz ±3 dB in standard mode. This makes it capable of reproducing both the deepest musical information and the powerful low-frequency effects found in modern movie soundtracks.
The heart of the PB-1000 Pro is a new 12-inch high-excursion driver engineered to move large volumes of air while maintaining exceptional precision and control.
The driver features a Fiber Composite cone offering an excellent balance between rigidity and mass. The extreme-excursion injection-molded surround allows highly linear piston-like movement even at demanding output levels.
The motor assembly incorporates a dual ferrite magnet structure with an extended aluminum pole, while the high-purity copper voice coil helps reduce power compression and maintain linearity throughout the driver's excursion.
The basket has been optimized using FEA analysis to maximize structural rigidity and thermal dissipation, contributing to the overall accuracy and reliability of the driver.
The Sledge STA-325D is a Class D amplifier capable of delivering 325 watts RMS and more than 820 watts of peak power. Its fully discrete MOSFET output stage is designed to provide the high current required to control the large 12-inch driver with precision.
The amplifier and driver have been engineered as an integrated system, allowing the PB-1000 Pro to deliver substantial acoustic output while maintaining excellent control and low distortion.
Unlike the sealed SB-1000 Pro, the PB-1000 Pro uses a dual-port bass-reflex cabinet. This configuration increases output at the lowest frequencies and allows the subwoofer to deliver greater acoustic pressure while reducing distortion.
The cabinet features an extra-thick MDF front baffle and rigid internal bracing designed to minimize unwanted resonances and provide an acoustically inert enclosure.
The standard operating mode provides a frequency response of 17-260 Hz ±3 dB, while the usable low-frequency extension reaches approximately 16 Hz.
The PB-1000 Pro incorporates a sophisticated 50 MHz High Resolution Analog Devices Audio DSP. The DSP uses 56-bit processing to precisely manage the subwoofer's response and optimize its integration with the main speakers and listening environment.
The system allows adjustment of key parameters including volume, polarity, Room Gain and three-band parametric equalization. This makes it possible to compensate for room-related peaks, cancellations and other acoustic issues with considerable precision.
The SVS Smartphone App provides Bluetooth control of the PB-1000 Pro directly from a smartphone or tablet. Users can make adjustments from the listening position without needing to access the rear panel of the subwoofer.
The app makes it easy to optimize the subwoofer for different rooms, systems and listening preferences, providing convenient access to the DSP functions and essential operating parameters.
The rear panel features the Intelligent Control Interface (ICI), equipped with an 11-segment LED display and push-button controls. This allows quick adjustment of essential parameters such as level, phase and low-pass filter directly from the subwoofer.
The PB-1000 Pro offers both stereo RCA inputs and a stereo speaker-level input, allowing it to be integrated into a wide range of systems. It can therefore be used with AV receivers and processors as well as traditional stereo amplifiers.
A USB port is also provided to power the optional SVS SoundPath Wireless Audio Adapter, making it possible to eliminate the signal cable between the electronics and the subwoofer.
The SVS PB-1000 Pro is designed for listeners who want to combine deep bass extension, high output, dynamics and precise control. The 12-inch driver, powerful Sledge amplifier and dual-port cabinet work together to deliver an exceptionally authoritative low-frequency performance.
Its ability to reach down to 17 Hz makes the PB-1000 Pro particularly effective for Home Cinema, where deep bass contributes significantly to realism and immersion. At the same time, its sophisticated DSP and extensive adjustment options make it highly suitable for serious stereo Hi-Fi systems.
Compared with a compact sealed subwoofer, the bass-reflex architecture provides greater output capability at the lowest frequencies, making the PB-1000 Pro an excellent choice for anyone looking for deep, powerful and physically engaging bass.
| Specification | Value |
|---|---|
| Product Type | Active bass-reflex subwoofer |
| Cabinet Configuration | Dual-port bass reflex |
| Driver | 12-inch high-excursion driver |
| Driver Cone | Fiber Composite |
| Amplifier | Sledge STA-325D Class D |
| Amplifier Power | 325 W RMS |
| Peak Power | 820+ W |
| Frequency Response | 17-260 Hz ±3 dB |
| Frequency Response - Sealed Mode | 19-260 Hz ±3 dB |
| Usable Low Frequency Extension | 16 Hz |
| Xmax | 13.1 mm |
| Xmech | 26.8 mm |
| Voice Coil Diameter | 1.5 inches |
| DSP | 50 MHz High Resolution Analog Devices Audio DSP |
| DSP Processing | 56-bit |
| Equalization | 3-band parametric EQ |
| Control | SVS Bluetooth Smartphone App |
| Inputs | RCA Audio Interconnect / Stereo Speaker Level |
| Outputs | Unbalanced stereo output |
| RCA Input Impedance | 16 kΩ / 1 kΩ |
| Speaker-Level Input Impedance | 1 kΩ |
| Trigger | 3-12 V AC/DC |
| USB Port | Power for optional SVS SoundPath Wireless Audio Adapter |
| Dimensions with Grille (H × W × D) | 479 × 380 × 509 mm |
| Dimensions without Grille (H × W × D) | 479 × 380 × 488 mm |
| Shipping Dimensions (H × W × D) | 594 × 506 × 619 mm |
| Net Weight | 19.3 kg |
| Shipping Weight | 23.4 kg |
| Woofer Weight | 4.2 kg |
| Motor Weight | 3.14 kg |
| Cabinet Finish | Black Ash |
| Standby Power Consumption | 0.5 W |
| Certifications | RoHS compliant, lead-free construction |
| Included Accessories | Extra-heavy-duty high-current power cord |